Gridfinity Bin for Radius Gauges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bin for stockholmux' printed radius gauge set
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Gridfinity bin custom fit to stockholmux' 3D printed radius gauge set, as found on Github.
N.B., there are two ways to assemble the gauge set. Put the 10mm gauge on the bottom and the 1mm gauge on top, or the other way around. This bin only fits a set that has the 10mm gauge on the bottom.
The bin is stackable and has magnet holes.
I modeled it in Fusion 360. I have included the CAD model in both .f3d and .STEP formats.
How to Print
The material, perimeter count, and infill are not important. The model does assume 0.3mm layer height, but thinner layers work too.