Heart OnTop for Pen - Herz Aufsatz für Kugelschreiber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heart OnTop for Pen - Herz Aufsatz für Kugelschreiber
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heart OnTop for Pen
Attachment for the Ballpoint pen Gyroid + Cubic:
https://www.prusaprinters.org/de/prints/126323-pen-gyroid-cubic-with-holder-kugelschreiber-gyroid
Simply swap the screw and put the heart in the holder.
Don't be surprised if the heart goes a little harder into the holder of the screw. This is normal and ensures that the heart is securely fastened in the screw. If the heart is too loose, simply fix it with a drop of superglue.
The lower part of the screw (5-16mm) should be printed with 0.10mm because of the thread and the rest can be printed with 0.2mm (Prusaslicer: height range modifier).
Stl-Files (without configuration)
3mf-Files (with configuration) for MK3S and Mini
Printfiles (G-Code) for MK3S and Mini
Have fun and happy valentines day!
Herz Aufsatz für Kugelschreiber
Aufsatz für den Kugelschreiber Gyroid + Kubisch:
https://www.prusaprinters.org/de/prints/126323-pen-gyroid-cubic-with-holder-kugelschreiber-gyroid
Einfach die Schraube tauschen und das Herz in die Halterung stecken.
Wundert euch nicht wenn das Herz etwas schwerer in die Halterung der Schraube geht. Das ist normal und sorgt dafür das das Herz stabil in der Schraube befestigt ist. Sollte das Herz zu locker sitzen dann einfach mit einem Tropfen Sekundenkleber fixieren.
Der untere Teil der Schraube (5-16mm) sollte wegen dem Gewinde mit 0,10mm gedruckt werden und der Rest kann mit 0,2mm gedruckt werden (Prusaslicer: Höhenbereich Modifizierer).
Stl-Dateien (ohne Konfiguration)
3mf-Dateien (mit Konfiguration) für MK3S und Mini
Druckdateien (G-Code) für MK3S und Mini
Viel Spaß und einen schönen Valentinstag!