Core One Bed Stop Rear Heatset Insert Reinforced
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed Stop Rear with a heatset insert channel instead of a square nut slot. Should be much more sturdy.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 63
- Wydruki
- 2
- Wyświetlenia
- 561
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
My original Bed Stop Rear cracked when I screwed the CoreXY assembly to the Backplate. The plastic in behind the square nut was too thin and weak to take the force when tightening the screw through the back.
First, I only wanted to print a replacement part. Then, I thought I could move the slot further away from the back to make the plastic holding it thicker. Then I figured a heat set insert is the easiest and most reliable solution. At least for those people who have M3 heat set inserts on hand.