"The Hook" (Part 1/3 of SCROG - System MXG_2)

If you like what I do here, come visit my (German) Discord or my Facebook group.

Discord: MX-creations

Facebook: 3D printed Grow Tools & Accesories - free .stl


This is part of my new SCROG system MXG_2

“The Hook”

Features:

- Integrated rope tensioner
- Non-slip thanks to TPU inlay
- A reinforced "spine" prevents bending
- Open design, simply click the hook on
- Highly load-bearing (see pictures)
- Variants: 15, 16, and 22mm
- Made for 3mm elastic rope

 

Instructions:

Printing Settings:
Material: PETG
Layer height: 0.2mm, nozzle: 0.4mm
Body 1: 4(5for22mm) perimeters, 30% grid infill
Body 2: 5(6for22mm) perimeters
Inlay: TPU 100% infill
 

V1

1. Insert the TPU inlay.

2. Carefully bend open the barb with a small screwdriver and thread the elastic rope in from the back, then upwards and out, and back in, passing it sideways past the barb.

3. Press the elastic rope into the middle of the barb and pull everything taut.

V2 (optional)

1. Insert the TPU inlay.

2. Crimp a wire ferrule (6,0mm²) onto the end of the elastic rope.

3. Insert the crimped end from the back, guide it upwards and out, and insert the crimped end.

4. Pull taut, and you're done!

V3 (optional)

1. Use the hole for building your custom net ;)

I hope you will enjoy it & stay green !


most product links are supported by affiliate marketing


If you appreciate my designs and would like to support my work, you can do so by buying me a coffee. Your support means a lot!

This 3D model is the original intellectual property of Andreas Marx and is protected by copyright laws. You are welcome to download and print this model for your own personal use. However, any other activities such as altering the design, selling the model or its prints, or using it for commercial purposes is strictly forbidden without receiving prior written consent from the creator.