1 / 3
Suzuki Carry Bumpers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suzuki Carry Bumpers, you'll need to print 6 total.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
My early 90's Carry had a few missing, and the ones that were on it were hard as rocks, I found them for sale but decided just to model my own. When printing the side that attaches to the truck is up and the side with the hole goes down.
I printed in black TPU 31-40% infill, .6mm nozzle, with max volumetric at 9mm/s without supports and didn't have any issues. I recommend you print them one at a time if you have problems with the TPU stringing.
I included the Fusion360 design if anyone want to change something.