Support Setting Test Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model to test out your support settings on a variety of overhang types!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — NoDerivatives
This model is designed to allow you to test support settings that you come up with on a variety of different overhangs that you could encounter in everyday models. These overhangs include: A normal straight overhang, a straight sloped overhang (30 degrees), a curved slope overhang, and an inserted overhang (main model on top and bottom of support structure). Also, on the top of the model is the same overhang types but with a 1 mm thickness to test your settings on very thin support structures. Feel free to cut this model in your slicer to test certain overhangs rather than all of them at once.