1 / 1
IEC Appliance Inlet Box for 3030 Extrusions — zdjęcie 1

IEC Appliance Inlet Box for 3030 Extrusions

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Schurter IEC Appliance Inlet C14 box for Rat Rig V-Core 3 printer

Ocena
0 / 5
Polubienia
10
Pobrania
78
Wydruki
0
Wyświetlenia
513
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Simple box for Rat Rig V-Core 3 to mount Schurter IEC Appliance Inlet C14 with a power switch. I've also used rear cover for the inlet (Schurter part no. 0859.0047) to provide double insulation. The box is open on the back side and expected to reside against a non-conductive back panel of the printer (such as a polycarbonate sheet).

To be printed face down without supports and mounted to the 3030 extrusion with M5 screws and T-nuts.

Use purely at your own risk and note you're expected to hire a qualified electrician to work on mains power if you are not qualified yourself.

Tagi