1 / 1
Nerf Twisted Barrel Shroud (0.625in/16mm OD Barrels)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cosmetic cover for hobby-standard foam dart blaster barrels.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 418
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (27)Powiązane
This is a V1 so the tolerances may not be perfect, but this should be close to a friction fit on 0.625in/16mm OD barrels.
The length by default is 4.125 inches*, but should be easily adjustable in the slicer by duplicating and stacking the parts to make it longer or using Boolean modifiers to make it shorter.
*This length was specifically made for the 14" barrel on the SLAB, leaving room for a BCAR style attachment