Wall mount for FRITZ!Box 5530 router
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for FRITZ!Box 5530 with keyhole slots, optional lock panel.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
This wall mount uses a keyhole-style locking system, designed to ensure a firm and secure hold. For extra safety, I've added two optional panels (bottom and side) that help prevent the router from sliding out in case the clip breaks.
In my setup, I mounted the router from left to right and only printed the bottom panel, which is enough to stop accidental falls.
Tip:
Just print the bottom panel, depending on the direction you'll slide the router in. This support is designed for horizontal (side) insertion only - not vertical. That's why there is no top panel for vertical retention. The clips feel strong and lock in place: the router won't slip out on its own.
Compatibility:
This mous was custom-designed for the FRITZ!Box 5530 Fiber. If you have a different router, please check the keyhole spacing and dimensions in fusion360 or your slicer to confirm compatibility.
Remixes welcome:
Feel free to adapt this model for other routers. You can start from this one or use the clips available at this link: https://www.printables.com/model/1294004