1 / 4
Longhorn - XYL Unicorn Magazine Extension Drop Bumper — zdjęcie 1
1 / 4

Longhorn - XYL Unicorn Magazine Extension Drop Bumper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A drop-bumper for DamageReport's Longhorn magazine extension.

Ocena
5 / 5
Polubienia
3
Pobrania
19
Wydruki
1
Wyświetlenia
161
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed to print in TPU, this part slips over the bottom of the Longhorn extensions (designed to work with any of the 3 sizes)

 

I've created a tall and a short version. 

The short extends up 30mm, and will fit onto any of the Longhorn extenders

The tall extends up 50mm and fits on only the +2 and +3 Longhorn extenders

 

I find when I try to remove the drop bumper right away, it comes off a decent tug. After the TPU has time to seat back to its original shape, they take a good pull to remove.
 

Print Instructions:

I printed mine with 5 walls, 100% infill. TPU is pretty tough and probably doesn't need that much for this part, but it doesn't take too much extra time and material.

 

A huge thanks to DamageReport for making the .step files available, making this remix quick and easy. 

Tagi