Cooling Container for Tall Cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling Container for Tall Cans
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 263
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Suitable for tall cans.
Suggested to be printed with PETG at 20% infill, 3 perimeters, and gyroid fill pattern.
The container consists of a main body, lid, and seal.
The lid is printed with 100% infill.
The seal is printed using TPU.
Due to possible fluid leakage, the cooling medium is a gel. This gel is formed by mixing a Super absorbent sodium polyacrylate with water and a small amount of glycerin. Procedure: pour half a teaspoon of superabsorbent into the container through the opening, then add a mixture of 200 ml of water with glycerin in a 3:1 ratio. After pouring, shake well, and within approximately 10 minutes the liquid will turn into a permanent gel.
Ingredients:
Super absorbent sodium polyacrylate conf. 0.5 kg. : Amazon.com.be: Garden
Orgaliane Vegetable Glycerine 250 ml - 100% Vegetable : Amazon.com.be: Beauty