Zombicide: Undead or Alive - Hero Horse Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my attempt at creating a mountable horse for any hero (assuming to replace those flat horse cardboard tokens)…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my attempt at creating a mountable horse for any hero (assuming to replace those flat horse cardboard tokens) within Zombicide: Undead or Alive.
I used a combination of some simple shapes + logo and the great low poly horse by chemlife: https://www.thingiverse.com/thing:925638
V3: I reduced the overall height and tested a few prints. 100% is easy with room for other models that might fall over the base shape.
90% fit the base a little tighter and I liked this size of the horse printed overall.
V5: Skipped a few minor tweaks to the feet/base in V4. I reduced the overall higher of the horse and made the hero ring sit lower in the horse so they weren't standing necessarily on the horse.
You can print V5 at 100% size. I even did 100% fill as the amount of filament was still very small. Be careful removing the supports around the bases. A few samples lost some legs that had to later be super glued back on :)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
No
Supports:
Yes
.20
Infill:
80%
Notes:
The horse is large... but I actually like the quick overall look and how this might be on an actual game tile. I did print this at 90% size and fit Samson's base (the standard Zombicide base size) more better, plus is saved on time/filament overall. The 100% print size might better be suited for the colored-bases that can be put on a hero too. The pictures included are printed at 100%.
Category: Toy & Game Accessories