Voltage Converter Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a snap fit box designed for standard voltage DC to DC converter bricks.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple snap fit enclosure case designed to house a DC to DC converter brick. It uses x2 m3 nuts pressed into the plastic, and x2 7mm socket heads (6 or 8 may work). The DC to DC converter is not centered to allow wire routing along the side. It is designed with a hole for a DC barrel connector to be installed. Other wire routing pass through features will need to be drilled or cut. I am using this for a Starlink Mini to go from 12V to 24V, but you could use it for other projects as well. Please let me know if there are any issues.