Garden Hose helpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gardena compatible
- Ocena
- 5 / 5
- Polubienia
- 1066
- Pobrania
- 1664
- Wydruki
- 9
- Wyświetlenia
- 9485
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
2025-jun-23
Added 3MF_Female and STL_Female folders
2025-jun-22
Well, the competition’s over, and as usual, I won absolutely nothing—BUT I’m carrying on like before, and here’s my latest: a hose coupling with a keyhole lock! This is Version 1.00, where the hose still needs to be secured with a hose clamp. You can either use a traditional clamp or print your own (attached, just grab an M4 screw and nut to fasten it).
The keyhole lock requires slight force during insertion due to tight tolerances.
Both the water housing part and the water stopper part have supports that need to be removed with pliers.
2025-may-17
Added GardenaCoupling_2Way
2025-may-18
Replaced GardenaCoupling_3Way 3mf-file
2025-may-19
Updated this description with info about the o-rings
Added folder STL_O-Rings, if you can print flex-filament
See the .3mf files for print settings
Some useful coupling among with plugs etc
Useful O-rings
Inner diameter 11 mm with section 2.5 mm (gives outer diameter 16mm)
Inner diameter 16 mm with section 2.5 mm (gives outer diameter 21mm)
Inner diameter 18 mm with section 2.5 mm (gives outer diameter 23mm)
Inner diameter 18 mm with section 3.5 mm (gives outer diameter 25mm)
I have tested every connector (see the .3mf files) (except the 3-way one) – no leaks!