Wipes-Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispenses wet wipes, one by one
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Container to dispense a variety of wet wipes, with a small storage footprint.
Body and Lid, as well as the tool can be printed with PLA/PETG. TPU is needed for the sealing ring and the dispenser opening.
The dispenser opening has to be screwed in after filling the container. The tool provides grip to screw it in all the way and helps with unscrewing after using the content of the container.
The tool can be kept within the top if desired. However, this hinders the easy use by increasing a step before being able to pull a wipe out.
Can be printed without supports if orientated correctly.