1 / 5
Hikvision junction box to Unifi G6 dome mount adapter plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter plate to mount Unifi G6 domes to Hikvision dome pattern juction boxes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Do you need to replace Hikvision dome security cameras with new Unifi G6s, or just want to use a cheaper junction box? Then this model is for you!
- No supports needed
- 4x M3x5x4 (“Voron” style) inserts
- Printed with 3 Walls and 15% gyroid infill using Polymaker ASA
There are two separate files one for if your junction boxes have a silicon nub for the cable notch, and one without the nub.
This was specifically developed for the BOX04-DM18 junction box, but any box with the same bolt pattern should work.
Modeled using Onshape.