1 / 3
rain.Fram3 - A Rainmaker Insert for the Fram3 CMF Phone 2 Pro Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calm yourself with the soothing sound of rain.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
About
This model is a set of inserts for the Fram3 cover that is compatible with the CMF Phone 2 Pro.
The design is inspired by a combination of liquid motion timers and rainmakers.
This insert was supposed to be a liquid motion timer but the insert dimension did not allow for a proper “dropper”.
Additional Supplies
- 1mm Acrylic (dimensions below)
- 0.25mm diameter (or smaller) Beads or Ball bearings
1mm Acrylic Dimensions
The following dimensions have 0mm clearance.
- Top: 31mm x 31mm
- Middle: 66.5mm x 88.75mm
- Bottom: 37mm x 12mm
Required dimensions may vary due to individual printer tolerances.
Printable cutting templates have been included, but are also subject to variation printer tolerances.
Slicing & Printing
- Orient model with the open side facing up.
- Disable supports.
- Add a pause after the retaining wall is printed / before the sealing layer is printed.
- Print until the pause.
- Add beads.
- Place acrylic sheet.
- Continue print.
All First Party Insert Sets a.k.a “Inserts I Would Use”
HERE! rain.Frame3 (Rainmaker)
