Star Wars Tie Aggressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TIE/AG Aggressor at 1:270 scale with rotating turret
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 438
- Wydruki
- 2
- Wyświetlenia
- 1610
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The TIE/AG Aggressor is more or less the imperial counterpart to the rebel y-wing - A fighter-bomber with poor maneuverability and a rear-turret. But unlike the y-wing it has no bombs, hyperdrive or shields. Although the TIE Aggressor has been reintroduced into Canon, it is yet to appear in any prominent role.
This is a model at 1:270 scale. Its 30.4mm long, 27.4mm wide and 18.6mm tall. The turret can rotate and is print-in-place.
For a holder, it is compatible with a small peg, pin and base.
Print Instructions
Printed at 0.1mm layer height.
Rotate by -90° along the x-Axis so that the engines point down towards the printbed and the cockpit points up. (This reduces the amount of supports.)
Set supports to buildplate only and add “tie_aggressor_blocker” as a support blocker. (Right-click on the model → add support blocker → load… → select file “tie_aggressor_blocker.stl”)
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#