MeanWell RS-150 Series CAD Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CAD model for the MeanWell RS-150-5, RS-150-12, RS-150-24 etc. power supply series.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This CAD model is not intended to be printed, it is meant to aid in designing models around this PSU series. While just the bolt pattern may be enough sometimes, having the exact size helps when fitting a case and checking for interference before wasting filament.
Note that this model should apply to all PSUs in the MeanWell RS-150 series, e.g. 150W-class PSUs with different output voltages. The following models seem to exist and should be compatible:
- RS-150-3.3 (3.3V output, 30A)
- RS-150-5 (5V output, 26A)
- RS-150-12 (12V output, 12.5A)
- RS-150-15 (15V output, 10A)
- RS-150-24 (24V output, 6.5A)
- RS-150-48 (48V output, 3.3A)
All dimensions are based on the datasheet, however some like the height of the connector block are not since they have not been specified there.
The model is based on the official datasheet (version 2019-07-11, seems to still be up-to-date), specifically the mechanical specification as below:
The Fusion 360 design is also available under this link.