Bicycle Shulz KRABI stand support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace base one which can be easily damagged.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Purpose
This 3D-printed component serves as a reliable replacement for the original welded folding bike stand support. The original design, welded directly to the bicycle frame, was prone to breaking under stress, especially from accidental impacts or rough handling.
Advantages of the New Design
- Easily replaceable without welding.
- Enhanced durability to withstand impacts and vibrations during daily use.
- Quick installation and removal.
Recommended Printing Settings
- Material: PETG or ABS for strength and durability
- Orientation: Optimal strength achieved when printed on the side
- Use multiregional print
First region - where screw is located (see screenshots)
- Walls: 6 walls for structural integrity.
- Infill: 60-100% infill for maximum strength and longevity.
Second region
- Same number walls as first region
- Infill: 15% infill
- 3d honeycomb for more strength
Installation Instructions
You will need M6 screw and M6x8x8 insert
Simply remove any remnants of the original support and securely bolt or clamp this new adapter to your bicycle frame. Ensure all bolts are tightened firmly for safe and reliable use.
Enjoy a more robust and convenient solution for your folding bike support!