camera strap rope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a camera strap made of recycled old climbing rope
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
3D Printed Camera Strap Mount – Reuse Old Rope with a Secure, Custom Fit
Give new life to old climbing rope or paracord with this 3D-printed camera strap mounting system. Designed to be strong, simple, and compatible with most DSLR and mirrorless cameras, this mounting bracket lets you upcycle rope into a durable, stylish camera strap.
Rope : Designed for use with 12mm rope
Print Orientation: Print the part on its side for optimal layer strength along the load-bearing axis.
material: Works well with eSUN PLA+, but PETG is recommended for better durability under outdoor conditions.
Print Settings:
Layer Height: 0.2mm
Supports: Enabled
Material: PLA+ or PETG
Assembly Tip: After printing, insert the rope through the openings, then stitch across the provided holes using waxed thread or strong cord to lock it in place