Marceline's Bass Guitar Controller for Clone Hero
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Marceline's Bass from Adventure Time as a guitar controller for Clone Hero.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Follow the Poly Clone Controller instructions. Body and ax are split up so you can use 2 different filaments or easier to paint. Used super glue for the body (28 alignment pieces) and headstock. Do not glue the X as it is made to be popped out to get to the screw. Main filament used was Elegoo pla burgundy with the main body painted a different red. Straight red pla and burgundy pla was too harsh of a contrast for my liking. Only small USB cords will fit, may need to sand the head for it to fit. IMPORTANT had to use “keep disconnected faces” setting in Cura for the body to print correctly. Unsure about Prusa slicer settings.