ButtPals bread clip - Peter Griffin - Family guy

Inspired by ButtPals, here my personal Family Guy - Peter Griffin version.

Start with white color, then after 3mm insert a pause and change to black

EDIT: added color stls

Hope you enjoy it!

HOW PRINT IN MULTICOLOR WITHOUT MMU:

1. Printer Settings → GENERAL → EXTRUDER
2. add 1 extruder for each color, in this case 4 extruders (black, white, brown, pink)
3. assign a color for each extruder
4. go to Pinter Settings → Custom Gcode → Gcode tool change and add this lines:

; START_CUSTOM_TOOL_CHANGE LAYER
[layer_z] / [layer_num]
{if layer_num >= 0} M600{endif}
; END_CUSTOM_TOOL_CHANGE

5. go to PRINT SETTINGS → MULTIPLE EXTRUDER → CLEANING TOWER

6. Enable the purge tower

7. import the first item, the white base

8. on the white base ites, right click, then choose ADD MODIFIER and select LOAD. now pick one color and repeat the same procedure for all the colors.

9. Assign the right color for each part. Look at the right part of the screen, you will see the part name and a little box with the part color. change it to the color you need to print.

now slice and see it everything is ok, then print. The printer will stop for color change, so be prepared to change it a lot of times….