Kitchen cabinet kickboard plinth 30mm plate and clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kitchen cabinet kickboard clip and mounting plate suitable for 30mm risers.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 136
- Wydruki
- 4
- Wyświetlenia
- 349
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Mounting clip for P Reardon's 30mm kickboard clip.
Not much to say really. If you need it you need it.
Recommend printing in PETG at 0.2mm or 0.25mm
My makes were done on Prusa Core One, with 0.6 HF Obxidian nozzle at 0.25 layer height.
Screw holes are suitable for 15mm long 4mm countersunk screws.
If you are wondering why the connector is not centered, I simply copied the place of my original broken mounting plate - given what these are used for, it doesn't really matter where it is. My second photo of the parts is side by side my broken clip and mounting plate for comparison.