RFID Tag Writer for Creality CFS Custom Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RFID Tag Writer for Creality CFS (Creality Filament System) – Custom
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 1816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This project is based on the open-source repo DnG-Crafts/K2-RFID, which allows you to write custom RFID tags for use with Creality's CFS – Creality Filament System.
It lets you write tags that contain:
Filament type
Color
Weight
In addition, it helps track the remaining filament by calculating the time it takes for the tag to rotate back to the reader.
🛠 What I did:
I designed a custom 3D-printable enclosure for this project, making it cleaner, more organized, and easy to assemble.
📦 Included in this download:
.3MF file with all enclosure parts
Updated pinout diagram for ESP8266 wiring
Modified firmware version for ESP8266 (SSID changed from K2PLUS to CFS)
Clear assembly photos
🔧 Required Hardware:
| Component | Link |
|---|---|
| ESP8266 (D1 Mini Type-C) | AliExpress |
| RC522 RFID Module | AliExpress |
| RFID Tags – Wet Inlay (13.56 MHz, 1K memory) | AliExpress |
| M3x6mm Countersunk Screws (×7) | AliExpress |
| 1× LED (used instead of buzzer) | — |
⚠ IMPORTANT: Make sure to use 13.56 MHz / 1K RFID tags (e.g., NTAG213 or compatible). Tags with different frequencies or memory sizes may not work properly with the RC522 module or firmware.