Klammer für Moosstange / Clamp for moss pole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,07 € – 0,09 € netto (bez VAT)
Dla pliku: simple_clamp_0.4n_0.15mm_PLA_MK4_5m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,08 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 4,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Eine Klammer zum Zusammenhalten der Einzelabschnitte. / A clamp to hold the individual sections together.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 221
- Wydruki
- 3
- Wyświetlenia
- 1285
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ich habe eine kleine Klammer konstruiert, welche die Einzelabschnitte der Moosstange zusammenhält, damit diese sich nicht so einfach auseinander drehen. Es gibt sie in zwei Varianten. Eine sehr einfache (simple_clamp) und eine Zierklammer (decorative_clamp), welche sich in das schöne Design einfügt.
In beiden Fällen habe ich sie mit einem Rand gedruckt, damit sie nicht vom Druckbett rutschen. Bei der Zierklammer habe ich zur Sicherheit noch Stützen auf dem Druckbett eingestellt. Die Druckausrichtung sieht so aus:

I have constructed a small clamp that holds the individual sections of the moss pole together so that they don't twist apart so easily. There are two versions. A very simple one (simple_clamp) and a decorative one (decorative_clamp), which blends in with the beautiful design.
In both cases, I printed them with a primm so that they don't slip off the print bed. For the decorative_clamp, I added supports on the print bed for safety. The print alignment looks as shown in the pictures.