1 / 2
Zubax FluxGrip Mono-mount Adapter — zdjęcie 1
1 / 2

Zubax FluxGrip Mono-mount Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter for the Zubax FluxGrip for applications with a single attach point.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Created this so I could mount my FluxGrip using camera mounting hardware. The version with the small photography thread, ¼"-20 UNC, uses modeled threads but you should always buy a tap to clean out the threads when you 3D print them. Otherwise, buy a heat inset.

Note, the FluxGrip mounting holes are all exact/under-sized M3. You should expect to clean these out with an M3 drill bit once printed.

Best printed with Carbon-Fiber infused Polycarbonate or PETG.