Gaggia Classic Toggle Switch Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement switch panel for Gaggia Classic using panel mount toggle switches.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement switch panel for the Gaggia Classic using three panel-mount SPST toggle switches. The model was designed for Bulgin C3900BAAAA switches and it may need remixing to fit others.
Print in PETG or another heat resistant material.
0.4mm nozzle
0.2mm layer height
3 walls,
Minimum 3 bottom shell layers
Tree supports on buildplate only for the bottom faces of the side clips.
This is marked as a remix as the design is heavily based on an existing design, however it was created from scratch so exact dimensions will differ. If you want to use rocker switches or want indicator lamps I would recommend looking at the original.