Wall Planter Holder for 150mm Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print 2-piece design, holds 150mm planter, sized around common drywall screws
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife wanted to put a planter on the wall, so I whipped this up. It's nothing fancy, there are plenty other wall mounts for planters. This one is simple, clean, and can be print on one plate (nest the base inside the ring :)
Uses two drywall screws. I printed it PETG, with the base flat on the bed and supports for the notch. ~3 hrs on X1C.
This was designed around a 150mm cylindrical planter. The base is smaller than the ring so it probably will NOT work for oddly shaped or conical planters. Please see the attached Fusion file if you wish to modify it, I'm sure it can be tweaked to fit your needs.
edit– added fusion file for filleted base