"FakeCAP Solar Maximus" FakeTec Meshtastic Node
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My most sophisticated Meshtastic node to date, pretty much featuring every option/function meshtastic has to offer.
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 194
- Wydruki
- 1
- Wyświetlenia
- 5130
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPFRONT!
I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other channels are ONLY for my thermal builds!
_________________________________________________________________________________________________________________________
Featuring pretty much everything you can put in a node of its size like, buzzer, vibra motor, Notification LED (behind the white transparent claw), environmental sensor: temp, humidity, barometric pressure, air quality, canned messages, dual GPS module, main power switch, external reset and prog button, 1500mAH Lipo battery and most importantly a "huge" 5volt 1 Watt solar panel on the back of the node. A nightmare of wiring with thin wires but worth it in the end, I am super happy with the outcome ;)
With enough sun, this node can totally survive on its own!
Case was printed in 25%real dark wood fiber filament (Maroon) and silk copper Celtic tribals.
UPDATE30.05.2025
Added a “MECHA” variation to not always go down the same reappearing “wolf path” ;)
Part List:
FakeTec DIY Meshtastic Node: preferable V5 or V5 rev. B
gargomoma/fakeTec_pcb: A low-cost nrf52 device.
Sliding switch: 3MM
BME680 Environmental Sensor (optional):
Buzzer: 5x5x2mm
Navigation switch for canned messages: K2-02 hollowed shell: (
Antenna:
Heltec Federantennen-Zubehör - AliExpress 30
GPS module (GPS +BDS):
0.96 OLED white or yellow: ( There seems to be always some small differences in size when it comes to the pcb, I adapted the fakecap for the white and yellow display, no guarantee given for other modes!)
Wiring cable 0.3mm:
SMD button kit:
25/140pcs smd taktile Druckknopf-Kit: Werte Dip-Mikrosc halter für DIY-Elektronik - AliExpress 13
Lipo battery 1500mAh:
Vibration motor:
LED: choose whatever color you like
Solar panel: I did order 20pieces right away which is a lot, but you can choose any other panel with the same size:
Mppt Solar charger:
Still waiting for them as the first order was lost so they are nowhere visible on the pictures.