Gimble Protector. Hoverair X1 ProMax
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 83 shore TPE rubber gimble transit protector
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 143
- Wydruki
- 1
- Wyświetlenia
- 546
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a replacement for the original gimble protector which I decided was too large, too cumbersome and a distraction.
Mk2 is minimalist but affords the same level of protection and movement stability. It remains within the footprint of the Hoverair ProMax and is easily removed by flexing the side arms of the cover (see video)
Made from 83 shore soft TPE rubber. BGcode for Mk4 and Mk3 provided plus STL.
Prints from face down. Requires enforced support for the cavities in the side arms (for the edges of the lens support)
See here for the pocket protector for the original HoverAir X1
HoverAir X1 Pocket Protector by Rosti | Download free STL model | Printables.com