1 / 5
Jayco Camper Trailer Winch Door Frame
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement frame for winch access door for 1997 Jayco Finch and possibly other models.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The winch access door on my 1997 Jayco Finch broke away at 2 of the screw points. I designed a replacement door frame.
There's 2 parts so it can be printed with no supports.
- The frame part, printed flat on it's back, I printed with 4 walls to ensure there would be solid material under the screw heads.
- The latch block. This fits into the recess in the back of the frame for the door latch to grab.
I printed it in cyan PETG, mostly because it's the only filament I had on hand that wasn't PLA.
Assembly Instructions
- Insert the latch block into the back of the new frame. It should be a friction fit. You can use some glue if you want but I didn't need to.
- Disassemble your original door and frame. You need a flat screwdriver from the back of the frame to push in one of the hinge pins.
- Search high and low for the hinge spring and pin that just shot across the room because you didn't cover them with your hand when you took the door out of the frame.
- Insert the hinge spring and pin back into the door.
- Insert your original door into the new frame, starting with the solid pin.
- Screw the new assembly to your camper.
- Pat yourself on the back. Have a beer. Go camping. (The order is up to you)
My Print settings
Printer: Bambu Lab P1S, standard 0.4mm nozzle, lid and door closed
Filament: Tecor Cyan PETG
Bambu slicer default “0.2mm Standard” profile, 4 walls, 15% gyroid infill