1 / 2
Prusa Core One PTFE Bowden Tube Connector Mod threaded (PC4-M10) — zdjęcie 1
1 / 2

Prusa Core One PTFE Bowden Tube Connector Mod threaded (PC4-M10)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed "Core One PTFE Bowden Tube Connector Mod" from @arcuslinus_110727 with M10 thread

Ocena
5 / 5
Polubienia
134
Pobrania
540
Wydruki
28
Wyświetlenia
2702
Oceny
28

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Update:
I added a M10x1 version besides the M10x1.5 version as many bowden couplers have the finer M10x1 thread.

I liked @arcuslinus_110727 mod of the right Core One Handle, but the PC4-M10 bowden coupler was too hard to get in.
Thus i modified that part of Linus' model and added a M10 thread with 0.1mm clearance to the model.

the small bowden piece between the coupler and the filament sensor should have a length of approx 28mm.
 
I suggest to insert the connector once before installation, to free the threads. A tiny drop of lubrication may also help if the threads are still too tight.

This handle goes well with my top filament guide

Tagi