Scope Throw Lever by Haxelll
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a custom throw lever for my scopes, so I made this!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I looked at some throw levers in store but I quickly thought “Hey, that's some expensive metal, I aint gonna pay 100€ for that”, so I decided to make my own one. Took me a couple of days and several iterations, but I think this works quite well! What I like is the length of the lever itself, you get alot of leverage this way.
The basic size is made for a Leupold Vari-X IIc 3-9x40 (around 32mm diameter zoom-wheel), but you can scale the model up and down a bit, as long as you can fit a screw and nut.
Hardware requiered (for basic size)
1x M3x10 screw
1x M3 nut