Dog Waste Bag Roll Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dog waste bag dispenser for 20 standard rolls.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dispenser for 20 standard dog waste bag rolls. The original maker used Amazon Basics bags and I've been using Earth Rated bags without issues. So far I haven't had any issues with bags getting stuck within the dispenser but the bags sitting on the top row usually need a little push to get things going.
Printing
I used PETG but I'm sure anything would be fine. You'll need supports for the pegs. 15% infill is plenty sturdy enough.
Assembly
There are 4 pegs that need to be glued/screwed into the sides. 2 of the pegs have curved edges and are pretty obvious where they go. The other 2 both look square, but one (BAG_HOLDER_JOINER_1) has a very slight angle to one of the sides. This one goes on the top to form the beginning of the ramp.