1 / 2
Mount for BTT ADXL345 / S2DW for HTA 3DSteel Extruder — zdjęcie 1
1 / 2

Mount for BTT ADXL345 / S2DW for HTA 3DSteel Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for BTT ADXL345 / S2DW on HTA3D 3DSteel extruder for Input Shaping and resonance tuning with Klipper.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a custom-designed mount that allows you to securely attach a BTT ADXL345 or S2DW accelerometer to the extruder assembly of the HTA3D 3DSteel printer. Ideal for resonance tuning (Input Shaping) with Klipper firmware, the mount ensures a stable and accurate sensor position. Designed for easy installation and compatibility with the stock extruder setup.

To mount the ADXL345 or S2DW sensor, you’ll need two M3 threaded heat inserts (3×4×5 mm) and two M3×6 mm screws.

This mount is for X-axis calibration only. For the Y axis, check out the following single-use mount — it’s a smart and well-thought-out design.

https://www.printables.com/model/901962-btt-adxl345-s2dw-bedslinger-mount

 

Tagi