Get DOGE Out of Our National Parks Stamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A depiction of a bison chasing DOGE away!
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The stamp itself: Get Out of Our National Parks.stl which is to be printed using a flexible filament (TPU)
The stamp holder: Get Out of Our National Parks Stamp Holder.stl which is printed with standard PLA.
These are designed that after it is printing you can slide the stamp into the holder (you may have to do a slight bit of sanding and scraping depending on your printer's quality)
This is a large stamp that is just a bit over 100 mm x 100mm and instead of buying a large stamp pad I made my own using foam from an old couch and black paint. Works better than a regular ink pad!