OpenSCAD library for mounting Molex MicroFit 3.0 panel-mount plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A library (and example) for making the cutouts necessary to fit Molex MicroFit 3.0 through a panel.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
The Molex MicroFit 3.0 connector is really really handy because you can actually crimp it reasonably well on a normal crimper, it's beefy, it's sturdy, and it's able to handle some decent power.
The 43650-xx00 parts are designed to be snapped into a panel between 1.57mm and 2.30mm thickness, so I whipped up a quick library based on the datasheet.
Since Printables wants a model, I also threw in one of my projects, which is a panel that will hold a 2 pin and a 3 pin connector sized for a medium sized Command adhesive strip.
Library requirements
This requires you to install the BOSL2 library to work.
Library usage
See the microfit panel 1.scad file for a usage example
molex_width(circuits) → Function which returns the width of the microfit.
molex_height() → Function which returns the height of a microfit
molex_cutout(circuits) → Module to return a 2D version of the cutout