1 / 5
Prusa Core One PSU Cover with LM2596 Buck Converter integrated — zdjęcie 1
1 / 5

Prusa Core One PSU Cover with LM2596 Buck Converter integrated

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A mod of the PSU Cover with integrated LM2596 Buck Converter to e.g. power a Raspberry Pi

Ocena
5 / 5
Polubienia
67
Pobrania
134
Wydruki
8
Wyświetlenia
1900
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I wanted a compact way to power my Raspberry Pi on the Core One and identified that there's some dead space above the PSU connectors. So i extended the PSU cover to make some room and merge it with an existing LM2596 case to allow proper protection.
The output power is routed through the hole on the right side. i connected a micro-USB cable to power my Raspberry Pi 3.

The Buck Converter Lid s held with two 10mm M3 screws in place,  the cables are secured with two zip ties.

The Buck Converter Model can be found on Amazon or Aliexpress, it's the very common model “LM2596 HW-411”. Make sure to adjust the output voltage to 5V prior to connecting the Raspberry Pi 

In case you are wondering: The Raspberry Pi Case is this one by @Malolo,
I added a custom base with magnets embedded, you find it here.

Tagi