EGO battery ergonomic strong holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Optimised EGO Battery holder for secure docking of even the big batteries and easy sliding the battery on and off.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 185
- Wydruki
- 3
- Wyświetlenia
- 423
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is optimized EGO battery holder for secure docking of even the big 10Ah or 12Ah batteries and easy putting the battery on and off.
A lot of 3D printed EGO Battery holders don't provide adequate support for the battery. Holding it just by the side rails is not enough for the heaviest batteries. Or, if they provide enough support, it is not easy to slide the battery off and on with one hand. Some even use wrong dimensions.
This battery holder solves it all - provides a strong support and easy one handed docking. For the wall mounting there is space for a large M5 washer (18mm diameter with 5,4mm hole) to provide firm attachment to the wall.
If you want to do it another way, there is also a step file without grooves for the washer.
Everything prints standing tall without supports. PLA is just fine.