1 / 6
Vortex Watering Device for hose
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whirled watering gives a soft water! It is a very gentle way to water plants in the garden.
- Ocena
- 4 / 5
- Polubienia
- 83
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 1950
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (109)Powiązane
With this watering device water is whirled in a vortex device. It commes out as a transparent water semisphere. Some people claim that whirling water in a vortex increases its quality.
Parts: Handle, vortex nozzle and Gadena connector fitting to the handle.
Printing:
- Material: I printed with PETG and do not have experience with other materials. Other materials might improve the stability of the threads.
- Vortex nozzle: print unright with thread on bottom. Use brim to keep stable on print sheet.
- Handle: print unright with flat surface on bottom. Print with support. Increase walls to 3 to incease stability (water pressure).
- Handle flat print (27.5.2025) for easier print.
- Threads: 3d printed treads are very sensitive. Clean properly, handle with care.
- Gardena connector: print upright with connector on bottom and threads on top. Use support on outside,
To connect handle and the nozzle have ½ inche threads. To connect to the hose you need a ½ femal tread or a Gardena ½ femal connector. Use seals or sealing tape to prevent leaking!