(Elegoo) Filament weight for AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nearly empty spools may get stuck and need extra weight wich you can add with these cylinder.
- Ocena
- 3 / 5
- Polubienia
- 5
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 363
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A lot of spools may have problems working right in the Bambulab AMS wich is why there are additional weights that can be put inside them. unfortunately those I previosly found didn't fit the spools from ELEGOO but these do.
Just fill the container with e.g. sand or anything heavy and close it by glueing the cap on and screw the second side on (one heated insert is used).
This side is easily removeable when switching spools while other similar model need to be opened comepletly which may cause some accidents with e.g. the sand inside.