1 / 2
Hueforge of Odin with wolfs and ravens — zdjęcie 1
1 / 2

Hueforge of Odin with wolfs and ravens

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hueforge of Odin with wolfs (Geri and Freki) and ravens (Huginn and Muninn)

Ocena
0 / 5
Polubienia
10
Pobrania
55
Wydruki
0
Wyświetlenia
219
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Project: odin.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 177.13x213.48mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
#000000 PLA creality black  Transmission Distance: 0.3
#707070 PLA sunlu grey  Transmission Distance: 2.6
#9c9c9c PLA sunlu grey silver  Transmission Distance: 3.2
#ffffff PLA creality white  Transmission Distance: 7
This print uses 4 unique filaments

Swap Instructions:
Start with black
At layer #10 (0.88mm) swap to grey
At layer #17 (1.44mm) swap to grey silver
At layer #22 (1.84mm) swap to white for the rest.
 

Tagi