1 / 1
Husqvarna 142/138 saw top cover spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Increases overall cap height by 5mm to accommodate a taller spark plug.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I changed the original spark plug (can't buy it) to a BOSCH WSR 6F. But it turned out to be slightly higher and when the saw was working, it began to push out the lid. I modeled the spacer and printed it from TPU 80A.
Largest model needs supports - even a crooked trace from the supports will not interfere.
For printing use elastic, oil- and petrol-resistant filament - medium soft TPU will be the best choice.
