1 / 4
Beauty Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For mascara and other things.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Women
- Licencja
- Creative Commons — Attribution — Share Alike
Beauty case for mascara, lipstick and other things.
- no support, 5% rectilinear infill with modifier only until top of bottom, 2-3 walls, 0.1-0.2mm layer height, 0.4mm nozzle, 3/4 bottom/top shells
- see FreeCad project file on GitHub: beauty-case.FCStd
Dont't be discouraged by the visible layer lines and ringing! It was my first printer on PU wheels without tuning parts etc…
Use PLA+ (see the fuchsia one in the pictures) which is slightly stronger and can be better polished. Take sand paper from 200 to 2000 and polish by hand on a glass plane with enough water. Don't waste time in coating or rotary sander. Better invest in polishing. In the end give it a thin patina with a bees wax for polishing wood. Alternatively try with fuzzy skin.