1 / 3
Custom Cinnamoroll Car Emblem – 100mm x 70mm — zdjęcie 1
1 / 3

Custom Cinnamoroll Car Emblem – 100mm x 70mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom Cinnamoroll logo designed to replace stock car emblem.

Ocena
0 / 5
Polubienia
6
Pobrania
11
Wydruki
0
Wyświetlenia
131
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

A custom Cinnamoroll logo designed to replace stock brand emblem —originally made to replace the rear Toyota badge on a Corolla. 

Sized at 100mm x 70mm, but can be scaled up or down to fit your vehicle. 

To install: 

  1. Remove the original emblem using a heat gun and dental floss.
  2. Clean the area with glass cleaner, acetone, and IPA/EtOH. Use acetone only on sticky residue—try best to avoid painted surfaces to minimize paint damage. 
  3. Print all parts with PETG. (I used clear PETG, see .3mf settings if using clear PETG.)
  4. Decorate as you like. (I used resin, glow in the dark glitter, aurora mica powder, and automotive spray paint for finishing, but feel free to get creative!)
  5. Attach with 3M automotive exterior adhesive tape. May use a heat gun to increase adhesion. 

Tagi