Replacement Hood for Mini Round Recessed LED lights (MRLF-XxW-RMH)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the ~25% coverage hood with nearly 100% frontal coverage. Directs light down if mounting the light vertically.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I mounted mini round recessed LEDs on my stairs vertically under the stair treads. I did not like how much light shone in my eyes. The factory hood did almost nothing for my use case. These replace the factory hood and direct almost all of the light down, onto my stairs, with very little shining horizontally.
These lights are part number MRLF-6xW-RMH and MRLF-1xW-RMH. It should work with the -RP versions (plastic, no hood), but I only tried the RMH version.
My lights are the 0.5W version, which appear to be discontinued, but the dimensions match the currently available versions. If you are using these lights on stairs like I am, I highly recommend the 0.25W version. The 1W version was way too bright for my application.
To make mine opaque white, I printed solid with black PETG then painted them white. They are slightly undersized compared to the factory hood so I didn't scratch up my paint during installation. The size will work fine even if you're not painting them.