Wand Display Stand – 3D Model for Horizontally Showcasing 4 Presentation Wands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a display stand for horizontally holding four presentation wands.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model is a horizontal display stand designed to hold four presentation wands (e.g., Quantelix, Catalyx, Virelia, Axiona).
Each wand rests gently in a U-shaped groove designed to fit handles with a diameter of 28–29 mm, preventing them from slipping or rolling.
The design is inspired by a magical library aesthetic and is ideal for displaying educational wand sets on a desk or shelf.
The uploaded STL file is a single-piece model, but for easier printing, it is recommended to use the "cut" function in PrusaSlicer to divide it into two parts before printing.
Brim is not recommended.
Recommended Print Settings:
– Layer height: 0.3 mm
– Wall thickness: 4 or more
– Material: PLA
– Supports: Not required
– Print flat on the bed
Additional Notes:
– Grooves are rounded to gently support the wand without causing scratches.
– For added scratch protection, consider applying a TPU or felt pad inside the grooves.
– If stringing occurs, it can be easily removed using a heat gun or small torch.