CORE One Unlocking 250mm x 240mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
YOU NEED A 257x257 SHEET TO RUN THIS TEST
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 3851
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- GNU General Public License v3.0
Don't tell show
250 x 220 is great for most things
But sometimes a little bit more may be useful.
To got there a bigger sheet is needed
I recommend the BiQu 257x257 sheets they fit into the core one and have an enhanced grip which is needed because the additional 20 mm are not heated.
How to do that
It is very simple just two settings.
Printers→General→Bed Shape→Size-Y→240
Printers→Extruder1→position→Extruder offset-Y→19
That it is! Save the new printer setting with a new name to be able to use it for your projects.
The 3mf file for this model already contains a printer setting with this changes.
CONS you need to know
- no heating at the first 20 mm
- bad first layer in this 20 mm only!
- no mesh leveling in this area
- purge line is in the same area (pull it off)
- the cryo plates do not last a long time especially if you abuse them with ASA
If in doubt try the quick test:
=> QuickTest
(You see the bad first layer in the lower part of the print)
(Don't care about the stripes, filament was wet and has a bad quality, just test print stuff.
You see the bad first layer at the upper site of this print which is the expanded size.)
Order your CORE One and earn extra Prusameter