1 / 4
100000rpm mini turbine smoke extractor for laser engraver — zdjęcie 1
1 / 4

100000rpm mini turbine smoke extractor for laser engraver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

tiny but powerful smoke extractor using 10000 rpm mini turbine with adjust windspeed good solution for smoke extracting

Ocena
0 / 5
Polubienia
14
Pobrania
29
Wydruki
0
Wyświetlenia
336
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Note I not use stock resistor. I change turbine resistor to resistor like on photo. Recommended use turbine with adjust speed, or power supply with voltage adjust, because if you use hose from cable channel can generated very high noise! adjust speed to decrease noise. also i use metal connector 2.5x5.5mm for powering. 

Tagi